Size

NOTE: CONVEXITY C SHALL NOT EXCEED 0.2 TIMES ACTUAL LEG SIZE, PLUS 1 mm (3/64 in.).

(A) DESIRABLE FILLET WELD PROFILES

(B) ACCEPTABLE FILLET WELD PROFILES

(A) DESIRABLE FILLET WELD PROFILES

INSUFFICIENT EXCESSIVE EXCESSIVE OVERLAP INSUFFICIENT INCOMPLETE THROAT CONVEXITY UNDERCUT LEG FUSION

(B) ACCEPTABLE FILLET WELD PROFILES

[— SIZE — f— SIZE —| [— SIZE —| • SIZE —J SIZE —| [— SIZE —J

INSUFFICIENT EXCESSIVE EXCESSIVE OVERLAP INSUFFICIENT INCOMPLETE THROAT CONVEXITY UNDERCUT LEG FUSION

(C) UNACCEPTABLE FILLET WELD PROFILES

Figure 9.1—Acceptable and Unacceptable Weld Profiles for Class C Welds

Was this article helpful?

0 0

Post a comment