Section 273 Equipment

Naval Sea Systems Command (1987). Use of explosives in underwater salvage. NAVSEA SW061-AA-MMA-010.

Section 2.7.4 Technique

Department of the Army (1992). Explosives and demolitions Army field manual. FM 5-250, Chapters 3 and 4.

Naval Sea Systems Command (1987). Use of explosives in underwater salvage. NAVSEA SW061 -AA-MMA-010.

Section 2.7.5 Standard Operating Procedures

Naval Facilities Engineering Command (1981). Paints and protective coatings. NAVFAC MO-llO (currentiy being revised).

Naval Facilities Engineering Commabd (1978). Maintenance of waterfront facilities. NAVFAC MO-104 (scheduled for revision in 1997).

Naval Sea Systems Command (1990). Ammunition and explosives ashore: safety regulations for handling, storing, production, renovation, and shipping. NAVSEA OP 5, vol 1, Rev 5, Chapter 2.

Section 2.7.5.1 Incident Reporting

OPNAV Instruction 5102.1C (1989). Mishap investigation and reporting, Appendix B: Sample message explosive mishap report.

Section 2.7.5.2 Transporting Explosives

Naval Sea Systems Command (1983). Navy transportation safety handbook for hazardous material. NAVSEA OP 2165, Rev 10.

Naval Sea Systems Command (1980). Motor vehicle driver handbook: ammunition, explosive, and related hazardous material. NAVSEA OP 2239, Rev 5.

OPNAV Instruction 5530.13A (1991). Department of the Navy physical security instruction for conventional arms, ammunition, and explosives (AA&E).

Section 2.8.2.1 Simple Deadweights

Rocker, K. (1985). Handbook for marine geotechnical engineering. Naval Civil Engineering Laboratory. (ADAl57894)

Section 2.10 CONCRETING

American Concrete Institute (1993). Guide for the use of high-range water-reducing admixtures (superplasticizers) in concrete. ACI 212.4R-93.

American Concrete Institute (1991). Placing concrete by pumping methods. ACI 304.2R-91.

American Concrete Institute (1991). Standard practice for selecting proportions for normal, heavyweight, and mass concrete. ACI 211.1-91.

American Concrete Institute(1991). Chemical admixtures for concrete. ACI 212.3R-91.

American Society for Testing and Materials (1993). Specification for fly ash and raw or calcined natural pozzolan for use as a mineral admixture in Portland cement concrete. ASTM C618.

Brackett, R.L., W.J. Nordell, and R.D. Rail (1982). Underwater inspection of wa terfront facilities: Inspection requirements analysis and nondestructive testing technique assessment, Naval Civil Engineering Laboratory, Technical Note N-1624. (ADB065622)

Childs, K., Jr. (1981). Survey of techniques for underwater maintenance/repair of waterfront structures. Civil Engineering Laboratory, Contract Report CR 81.009. (ADB056552L)

Khayat, K.H., B.C. Gerwick, Jr., and W. Hester (1993). "Self-leveling and stiff consolidated concretes for casting high performance flat slabs in water," Concrete International. Aug 1993, p. 36-43.

Kosmatka, S.H. and W.C. Panarese (1988). Design and control of concrete mixtures, 13th edition. Portland Cement Association.

Naval Construction Battalion Center (1983). Sierra wharf repairs, Naval Supply Depot, Guam, Underwater Construction Team Two, Project Completion Report. Port Hueneme, CA.

Naval Construction Battalion Center (1982). Bridge repair, KalaklanRiver R.P., Underwater Construction Team Two, Project Completion Report. Port Hueneme, CA.

Naval Construction Battalion Center (1981). Nabasan pier pile repair, Naval Magazine, Subic Bay, R.P., Underwater Construction Team Two, Project Completion Report. Port Hueneme, CA.

Naval Facilities Engineering Command (1993). Cast-in-place concrete. NFGS-03300G.

Section 2.10.1 Pumped Concrete

American Concrete Institute (1991). Placing concrete by pumping methods. ACI 304.2R-91.

Section 2.10.3 Prepacked Concrete

American Concrete Institute (1991). Placing concrete by pumping methods. ACI 304.2R-91.

American Society for Testing and Materials (1994). Standard test method for flow of grout for preplaced-aggregate concrete (flow cone method). ASTM C939.

American Society for Testing and Materials (1993). Specification for fly ash and raw or calcined natural pozzolan for use as a mineral admixture in portland cement concrete. ASTM C618.

American Society for Testing and Materials (1989). Standard test method for expansion and bleeding of freshly mixed grouts for preplaced aggregate concrete in the laboratory. ASTMC940.

American Society for Testing and Materials (1980). Standard practice for proportioning grout mixtures for preplaced-aggre-gate concrete. ASTM C938.

American Society for Testing and Materials (1980). Standard specification for grout fluidifier for preplaced-aggregate concrete. ASTM C937.

Section 2.11 GROUTING

Lorman, W.R. (1977). Epoxy resin for repairing concrete, Civil Engineering Laboratory, Techdata Sheet TDS 77-02.

Lorman, W.R. (1976). Engineering properties of epoxy resin as a structural adhesive for cracked reinforced concrete waterfront facilities, Civil Engineering Laboratory, Technical Note N-1429. (ADA025400)

Naval Civil Engineering Laboratory (1985). Operation and maintenance instructions for diver-operated grout dispenser. Technical Memorandum M-43-85-11 (O&M).

Naval Construction Battalion Center (1983). Boton wharf repairs, Naval Station, Subie Bay, R.P., Underwater Construction Team Two, Project Completion Report. Port Hueneme, CA.

Naval Facilities Engineering Command (1974). Ocean construction experience devolving from Project AFAR, Appendixes B and C. CHES/NAVFAC-FPO-7204. (ADB959964)

Was this article helpful?

0 0

Post a comment